Screen Protector for Tesla Model Y & Model 3

Tempered-glass protection for the original 15-inch display Protect the screen you touch on every drive. A precisely cut, 0.33 mm tempered-glass layer for compatible pre-refresh Model 3 and Model Y center displays. Choose HD for maximum apparent clarity or Matte when reflected glare and visible smudges are the bigger distraction. 9H-rated tempered glass HD or Matte 1- or 2-piece option Rounded 2.5D edge The product in five points What the protector does—and what you will notice day to day. A sacrificial layer for the factory display The 9H-rated tempered glass takes everyday surface contact before it reaches the original screen. The rating refers to scratch resistance, not an unbreakable guarantee. Less time chasing smudges An oleophobic surface helps reduce oil adhesion and makes fingerprints easier to wipe away. It is fingerprint-resistant, not fingerprint-proof. Choose the viewing experience HD prioritizes a clear, glossy view; Matte diffuses reflections and hides smudges more effectively, with a possible slight softening of perceived sharpness. Thin enough for normal touch use At 0.33 mm, the glass is designed to preserve normal touchscreen input when the surface is clean and the protector is fully seated. One for now—or one plus a spare The 1 PCS and 2 PCS choices refer to the number of protectors for the same front center display; 2 PCS does not mean front and rear screens. HD or Matte Pick the finish by your priority, not by a vague “best” label. MAXIMUM APPARENT CLARITY HD Clear Best for owners who want the protector to look as close as possible to the original glossy display. Prioritizes sharp text and color contrast Oleophobic surface helps with cleanup Retains more mirror-like reflection than Matte Choose HD if: screen sharpness matters more to you than reducing reflected glare. REFLECTION + SMUDGE CONTROL Matte Anti-Glare Best for owners who regularly notice bright reflections or visible fingerprints on the center display. Diffuses reflected light rather than mirroring it sharply Hides fingerprints and smudges more effectively May slightly soften fine text, contrast or white-screen texture Choose Matte if: glare and visible smudges bother you more than a small clarity tradeoff. Confirm the screen generation Made for the original 15-inch Model 3 / Model Y center display. Compatible selector Tesla Model 3: 2017–2023.10 Tesla Model Y: 2020–2024 Not listed for this product Model 3 Highland, Model Y Juniper, Model YL, Model S, Model X and Cybertruck. Refreshed displays use different dimensions. Use the selector wording as the fitment boundary. Do not order by “15-inch screen” alone. If your build date, screen generation or prior screen accessory makes the fit uncertain, contact TESERY with a clear display photo before ordering. Protection without inflated promises A replaceable glass layer, not an invincible screen. The protector is intended to take routine scratches, cleaning wear and incidental contact before the factory screen does. Severe impact can still damage both the protector and the display. Rounded 2.5D edge for a smoother perimeter 9H pencil-hardness rating for everyday scratch resistance Replace the protector if it cracks, chips or begins lifting First-time installation matters Dust control and alignment determine the result. Park on level ground and open Tesla Screen Clean Mode so touches do not activate controls. Wash and dry your hands. Close the windows and reduce cabin airflow while you work. Clean the display thoroughly, dry it, then use the dust-removal tool until no particles remain. Before removing the release layer, dry-position the protector and learn the edge spacing. Peel the release layer without touching the adhesive side. Align one edge and lower the glass slowly. Press lightly at the center and guide air toward the nearest edge with a soft cloth or installation card. If one spot remains, inspect it for trapped dust. Do not keep forcing a particle against the factory screen. Air and dust are different problems. A clean air pocket can often be guided to the edge. A sharp, fixed bubble usually indicates trapped dust and may require carefully lifting the nearest corner and using a dust-removal sticker. Installation reference Watch the full sequence before peeling the release layer. Product overview Finish and installed appearance Use the current live selector for fitment and quantity; older video wording may not reflect every current option label. Installation video Cleaning, alignment and bubble control Prepare the screen completely before exposing the adhesive side; most visible defects begin with dust or rushed alignment. Product facts What you are choosing. Item Current product information Compatible vehicles Model 3 2017–2023.10; Model Y 2020–2024 Display Original pre-refresh 15-inch center display Material Tempered glass with oleophobic surface treatment Hardness rating 9H pencil-hardness claim; scratch-resistant, not unbreakable Thickness 0.33 mm Edge Rounded 2.5D edge